Description
Description
SMH360 Series Spool Guns are designed to feed wires which are difficult to feed through the standard MIG gun. These Guns can be used for stainless steel, flux-cored, and thin solid wires however they are most commonly used for aluminum and brazing wires measuring 0.03, 0.035, and 0.040 in. If you are going to use a MIG gun longer than 15 feet with solid wire or flux-cored measuring 0.023 or 0.030 in., Spool Gun is the best option.
SMH360 is a 300 A lightweight, well-balanced, dual groove drive roll, easy to set up, designed for easy and reliable aluminum wire feeding with a variety of CV power sources and engine-driven welders. The design of this spool gun reduces the maintenance and production time by allowing easy access to the drive rollers and performing routine maintenance without disassembling the gun.
Features
- Cost-effective solution for precise control of MIG welding with hard and soft wires.
- Excellent and reliable for running one-pound aluminum spool MIG welding wire or two-pound mild steel and stainless-steel spool.
- Furthermore, silicon bronze MIG welding wire can be used as well.
- Easy nozzle adjustment.
- Ability to check remaining wire at a glance by a clear wire spool cover.
- A unique wire break keeps the spool under constant tension to prevent the overrun of the wire.
- Excellent wire retainer to keep the wire from de-reeling in operation.
- Impact-resistant handle that encased a durable motor.
- Possibility of using threaded or slip-on gas nozzles.
- Clear flip top wire spool cover allows you to check the remaining wire immediately.
- Ideal for medium and Heavy-duty industries because of a powerful 24V motor.
- MIG (GMAW)
- Pulsed MIG (GMAW-P) with pulsing power source
- FCAW
- Aluminum
- Steel
- Flux Cored Wire
- Aerospace Hardware
- Trucks Trailers and Railcars
- Travel and Cargo Trailers.
- Recreational Vehicles.
- Boat/Yacht Building
- Fabrication
- Automotive/Motorcycle Frames
- Sports products – Scooters/Bicycles
- Wheels
- Furniture
- Ladders and frames
- Ship Decks
- Sign Manufacturers
- General Repair and Maintenance
Technical Specification
| Technical specification | ||
|---|---|---|
| Welding Output: | 300A CO2 270A Mixed Gas at 60% Duty Cycle | |
| Recommended Wire Diameter: | For Aluminum wire: | 0.030″ to 0.045″ (0.8 to 1.2 mm) |
| For Brazing wire: | 0.030” to 0.040” (0.8 to 1.0 mm) | |
| For Flux Cored wire: | 0.030” to 0.045” (0.8 to 1.2 mm) | |
| For Solid wire: | 0.030” to 0.040” (0.8 to 1.0 mm) | |
| Recommended Gas Flow: | For 1/2″ (12.8 mm) nozzle bore | 22-27 CHF (11-13 l/min) |
| For 5/8″ (16.0 mm) nozzle bore | 30-35 CHF (14-17 l/min) | |
| For 3/4″ (19.0 mm) nozzle bore | 30-40 CHF (14-19 l/min) | |
| Motor Voltage: | 24 Volt DC | |
| Head and Nozzle style: | Binzel® Style | |
| Maximum Spool Size (Al, FCAW or Solid wire): | 4″ /102 mm | |
| Central Connector type: | Euro connector/ LCN® connector/ TWC® connector/ MLR® Connector | |
| Copper Cable Length: | 20 ft. (6 meter). | |
| Weight (Gun Only): | 2.71 Lb /1.23 Kg | |
Reviews
There are no reviews yet